Het is alleen aan de QC verantwoord

Het is alleen aan de QC verantwoordelijke om de compressor te starten en te stoppen indien dat nodig blijkt te zijn, gezien hier enige kennis voor nodig is en zaken zoals hoge druk, etc. waarop gelet moet worden.
Handleiding voor gebruik compressor is aanwezig bij de compressor!
Het spreekt voor zich dat er voorzichtig met deze apparatuur moet worden omgegaan

結果 (英文) 1:

It is only up to the QC Manager to start and stop the compressor if necessary turns out to be, seen here takes some knowledge and business such as high pressure, etc. which should be given.Guide to use compressor is present at the compressor!It goes without saying that careful with this equipment should be handled

結果 (英文) 2:

It is only to the QC controller to start the compressor and to stop if this proves to be necessary, given here for some knowledge is required, and issues such as high pressure, etc. that must be taken into consideration.
Instructions for use compressor is present at the compressor!
It goes without saying that there is careful with this equipment must be handled

結果 (英文) 3:

It is only responsible to the QC to start and stop the compressor if that proves necessary, given here is some knowledge for necessary and things such as high pressure, etc. to be aware of.
Manual for use compressor is present at the compressor!
The speaks for itself that it gently with this equipment should be handled